ICL7650S: 2MHz, Super Chopper-Stabilized Operational Amplifier

ICL7650S: 2MHz, Super Chopper-Stabilized Operational Amplifier

The ICL7650S Super Chopper-Stabilized Amplifier offers exceptionally low input offset voltage and is extremely stable with respect to time and temperature. It is a direct replacement for the industry-standard ICL7650 offering improved input offset voltage, lower input offset voltage temperature coefficient, reduced input bias current, and wider common mode voltage range. All improvements are highlighted in bold italics in the Electrical Characteristics section. Critical parameters are guaranteed over the entire commercial temperature range.
Intersil’s unique CMOS chopper-stabilized amplifier circuitry is user-transparent, virtually eliminating the traditional chopper amplifier problems of intermodulation effects, chopping spikes, and over-range lockup.
The chopper amplifier achieves its low offset by comparing the inverting and non-inverting input voltages in a nulling amplifier, nulled by alternate clock phases. Two external capacitors are required to store the correcting potentials on the two amplifier nulling inputs; these are the only external components necessary.
The clock oscillator and all the other control circuitry is entirely self-contained. However the 14 lead version includes a provision for the use of an external clock, if required for a particular application. In addition, the ICL7650S is internally compensated for unity-gain operation.

 

Features

  • Guaranteed Max Input Off set Voltage for All Temperature Ranges
  • Low Long-Term and Temperature Drifts of Input Offset Voltage
  • Guaranteed Max Input Bias Current .............10pA
  • Extremely Wide Common Mode Voltage Range.............+3.5V to -5V
  • Reduced Supply Current ...................... 2mA
  • Guaranteed Minimum Output Source/Sink Current
  • Extremely High Gain ........................150dB
  • Extremely High CMRR and PSRR..............140dB
  • High Slew Rate ...........................2.5V/s
  • Wide Band width............................ 2MHz
  • Unity-Gain Compensated
  • Clamp Circuit to Avoid Overload Recovery Problems and Allow Comparator Use
  • Extremely Low Chopping Spikes at Input and Output
  • Improved, Direct Replacement forIndustry-Standard ICL7650 and other Second-Source Parts
  • Pb-Free Plus AnnealAvailable(RoHS Compliant)

 

 

Image Part # Manufacturer Description Stock Price Buy
432111-06-0
Curtis Industries
CONN BARRIER STRIP 6CIRC 0.438"
50915
Min : 25
-
Detail
1301301
Essentra Components
PUSH-IN RIVETS, BLACK, .354 IN H
65357
Min : 1
-
Detail
0382110118
Molex Corporation
CONN BARRIER STRP 18CIRC 0.563"
77060
Min : 1
-
Detail
DW-46-11-F-D-610
Samtec Inc
CONN HDR 92POS 0.1 STACK T/H
72591
Min : 1
-
Detail
DW-50-13-T-D-200
Samtec Inc
CONN HDR 100POS 0.1 STACK T/H
67776
Min : 1
-
Detail
27MRM125125B
Essentra Components
MALE MINI RIVET, .125 HOLE, .125
77949
Min : 1
-
Detail
S-812C32BPI-C4MTFU
ABLIC U.S.A. Inc.
IC REG LINEAR 3.2V 50MA SNT6A
53251
Min : 1
-
Detail
Page 1 / 1